Anyone have an explosion digram or parts list for a Lionel 6-18255 diesel? Lionel's site does not have it. Looking to diagnose and repair the smoke unit.
Original Post
Replies sorted oldest to newest
Its there, even a seperate one for the smoke unit. Lionel 6-18255
Ah... I was looking here. https://www.lionel.com/custome...-documents/index.cfm
Was hoping to find a step by step diagnosis map.
It's too new for the service documents to be available. You need a volt\ohm meter.
Edit: I stand corrected. It's in supplement 45 around pages 75-78. Depends if you have Odyssey speed control which diagram that you use. It's attached. Right-click and save target as to your computer.
Check the smoke switch for voltage passing through or continuity with no power.
Is smoke on from the command remote?
Then check voltage at the input leads to the smoke unit.
If you are getting voltage, then it's in the smoke unit.
Do you hear the fan motor?
Start a new thread-How to diagnose smoke problem and perhaps GGG or gunrunnerjohn will assist. G doesn't have an email listed, but grj does.
If you do the above, they can guide you to determine where the problem is.
Attachments
Files (1)
OK I started the thread. I have the fan going now but still no smoke. Details in the other thread.
