need some help I have add40 diesel that the smoke part of the board is burned out any ideas out there?
Original Post
Replies sorted oldest to newest
Are you asking why it happened, who to send it to for repair, how to DIY repair, etc.? Providing as much info (does rest of engine work, did it ever work for you, did you just buy this as-is off eBay), photos if possible, would go a long way to getting folks to getting a focused response.
If you provide your email in your profile you'll usually get some direct responses from guys who do repairs.
The smoke unit PCB or the PS-2 board also. Can be many things unless you specifically know what is burned up from a visual. G
you can see the two little balck square thongs got hot and bubbeled up I think whoever upgraded this goofed thanks for the reply
I have a authorized repair man less than a hour from me I bought this thing on e bay from a friend when the shell was off you could see where whoever it was cut the wires off the smoke units my friend said he would help me finically to get it fixed all works great but the smoke
If your friend is going to pay to get it fixed...and you have a nearby authorized repair man, what then is the issue? 
The issue is the timeline with m t h you should know that
Understood. Why not then identify your timeline requirements. From what you have described, there are several OGR contributors who I'm confident can get you smoking. 
It's a matter of finding someone who has the time.
