Skip to main content

2 replies

PS3 GG1 nNo speed Control

MW Mark WagsOGR Forum Member

Hello I have a 30-5118-1 PS3 Railking GG1 that runs full speed. The symptom is it will start out with normal DCS control then after a couple of minutes it will go to high speed. I checked the tach wheel it is not dirty. The tach reader spacing is correct. Does this sound like the tach reader is failing? It also does not operate correctly with conventional.

Thanks

Mark

Original Post

Replies sorted oldest to newest

Add Reply

Views: 183
Post
The DCS Forum is sponsored by

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×