R & T trolley model from e-bay

Anything like this? Although it says Bob Treacy this is what I know as R&T.

Thats exactly the one. Still has $9.00 in pencil on the box. Do you know anyone that has built one?

Thanks much on that info. I'll try to follow it up.

Geo.

Just bought one (the PCC) off'n the 'Bay. Now I know why it was relatively cheap.The parts look to be sand-cast and will take beaucoup work to make acceptable.

Geo, I can't help you with anyone who built one unfortunately. Glad we identified it. That info was circa 1964-65.

Hi Rex. I bought the other one. There were 2 on there at the same time. From what i can see, the two sides and the rear casting will fit together pretty easy with a lot of dremel work. The front casting seems to be the problem, being too wide for the opening unless its supposed to stick out on the door side to form a wall next to the doors?? Let me know how yours is coming along when you get to it.

Geo.

The R&T line still exists (sort of) under the ownership of Bob Trimble out in CA.  You might notice those eBay listings for the Pittman trolley parts for the LVT car (sides & roof) and the various sides for the 4-wheel work motor which he periodically offers.  I think it's all old stock since casting this stuff in these alloys is not trivial, but if you had questions, you might contact him.

Thanks on that. I think i bought the Pittman 501 from him? I'll check it out.

Geo.

thimmaker-

It's going to be a long time coming. The kit has been relegated to the bottom of my infinite que of projects.

You need to get a few pictures of the prototype to study up on,