Skip to main content

4 replies

Remote Ross switches

TrainNewbyTrainNewbyOGR Forum Member DIGITAL SUBSCRIBER

To All:

Let me first say how valuable this forum has been to me. Even if I don't ask a question, somebody else has already done so. Now for my question. As my name would suggest, I am still new and inexperienced at this hobby. I am ready to start putting some money into it. I am going to be buying a Ross switch with a DZ1000 switch machine. My question is this: How do I flip the switch when it is about 10 feet from my control panel? I can't imagine that the cord from the switch controller to the switch would be long enough. What am I missing? I plan on staying somewhat basic but want to have a nice layout. Any help would be appreciated.

Original Post

Replies sorted oldest to newest

SteveHSteveHOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

You'll need to make up 10' cables that go between the DZ-1000 switch machine and whichever controller you will be using, for example the DZ-1002P.  Since the power draw is very low, Cat 5 or similar cable can be used for the control wires.

Maybe this will help.  Click image to expand.

zmacinstruct

Additional instructions are available on the Z-Stuff website here> DZ-1000 Switch Machine w/ DZ-1002P Remote Controller

Attachments

Hide
Images (1)
  • zmacinstruct
Last edited by SteveH
TrainNewbyTrainNewbyOGR Forum Member DIGITAL SUBSCRIBER

So I guess what I would get in the box would be the switch, switch engine, and switch controller. I am responsible for providing the wire. Sound like I have it right? I have some old Lionel switches that have wires coming out of the controllers already. I am slowly, but surely updating my knowledge.

SteveHSteveHOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

What comes in the box depends upon whether you buy used or new. If you buy new, there are options for what to buy with your switch and whether it's pre-wired for non-derail operation.  The latter option also requires a relay, such as the Z-Stuff DZ-1008.

Ross also sells custom foam roadbed for each type of switch.  I would encourage you to explore the Ross and Z-Stuff websites.

Maybe start here> http://rossswitches.com/switches.aspx

If you still have unanswered product questions, you could email: steve@rossswitches.com

Last edited by SteveH

Add Reply

Views: 94
Post
The Track Planning and Layout Design Forum is sponsored by

AN OGR FORUM CHARTER SPONSOR

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×