I have the Legacy innards out of a powered F3 B unit. Is it possible to install them into a steam loco ( easier said than done ), then reprogram its electronics to suit by using the correct steam code?
And if that isn't wishful scheming, can I also add ERR RailSounds to the Legacy electronics? The B unit never had sounds.
Bruce
Replies sorted oldest to newest
Forget about the programming of the RCMC, you don't have the tools or the Lionel proprietary code. It's functionality now is what you are stuck with.
It's good to know the limitations, John. I can find an appropriate diesel candidate for these workings. If ERR sounds can be added, all the better.
Bruce
The problem with ERR sounds is they're programmed to recognize TMCC 8-bit commands. If you operate in Legacy mode, the 9-bit commands will not be recognized by the ERR board and it will be mute.
Thank you, John. As I become more familiar with Legacy components, it's the information you provide that will help me determine their suitability for the projects I have in mind. I sure appreciate the help.
Bruce
You can pretty much forget about buying the Legacy sound components without a trade-in broken one. You can buy stuff like the Legacy R4LC, and even the Legacy motor driver boards. Sound is one of the Legacy big guns, and I suspect that Lionel simply doesn't want those boards appearing in anything but factory locomotives.
Access to this requires an OGR Forum Supporting Membership
