Skip to main content

When I pick up this engine the smoke unit was burned up so today I finally bought a new one put it in the engine but no smoke fan comes on sounds work everything seems to work but the resistor doesn't heat up. What else  should i look for. The old one looks like there was fire checked fluid as it was new tried second unit since i have 2 new ones neither work checked the switch its on. Turned on with tmcc also. 

Last edited by Jhainer
Original Post

Replies sorted oldest to newest

Whats the model#?

It could be a bad regulator, often times when the regulator goes bad a loco will smoke like crazy/overheat until the regulator quits altogether. Then it doesn't heat up at all. Lionel sells replacement regulator boards.

Your "burned up" description sounds like this may have happened.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×