I bought a Sunset SP 2-6-0 on the bay. All features work but the loco will not run. I have done a reset, still nothing. I'm thinking a motor driver module. Your thoughts.
Thanks
Original Post
Replies sorted oldest to newest
Push the tender plug in all the way, and make sure the red wire is top LEFT.
Instant feedback from the guy who made it, that’s customer service
Thank you Scott for your reply I got the loco to run, but no chuff. I really like the engine, just wish I could make it all work.
George
Chuffing: Check the 2/4 Chuff Switch under the cab. Look at the top of the chuff switches, make sure there are no loose wires. Make sure the plug is pushed in tightly. Make sure the sound is turned up on the tender volume control and AUX1 1,1,1,1 to turn the sounds all the way up.
gee Scott who needs to read the F'ing manual!!
Customer Service, With a Smile....
Scott
Thanks again for the great customer service, you are a good man. I found the chuff switch and moved the switch and on came the sound. I really like the size and look of the loco. How about an SP T31 ten wheeler?
Thanks again for your help.
Regards
George
