I have a Super Streets configuration which has a single roadway terminating with a K-line "Y" at each end. Each "Y" supports a loop using 16 inch roadway. The larger of the 2 loops works fine. The smaller loop is a just a 16 inch circle. The vehicles bump severely when crossing the points. Any ideas to fix would be appreciated.
Replies sorted oldest to newest
Try opening up the loop and putting some straights ahead of both portions of the T. This fixed a similar problem I had with the Y on a loop like that.
Hi Lee,
Thanks for the idea. Looks like my memory was faulty on the configuration. I do have 1/2 straights connecting the 16 inch roadway. The roadway feeding the 'Y" is curved with 16 inch. Looks like a 1/2 straight might help here as you suggested although I'm not sure if I have the room.
By the way, your Superstreet books are great. i have them both.
Access to this requires an OGR Forum Supporting Membership
