can anyone tell me how to change the address on the TIU 50-1003 and also to get a signal tried everything and even changed parts
Original Post
Replies sorted oldest to newest
Does the TIU turn on when powered up ?
How many times does the red light blink ?
What happens when you press "Read" on the remote - does it find the TIU ?
A little more detailed info on what exactly is happening would be helpful.
the led blinks once i have power on all channels the remote reads it fine i can even press all stop that works i am not getting any signal at all. also i cannot change the tiu address. tiu address error comes up on the remote. i swapped out different things. i put an engine on track and as soon as i put power to the tiu the engine comes right on. i can't add any engines at all.
If the remote won't talk to the tiu try a 4 wire phone cord and see if it works when it's directly connected. have you dropped the tiu or remote ? if so the transmitter board may have come loose inside the remote or tiu or both, have you tried a different remote ?
Alan
never dropped any thing also i tried the remote on another tiu works fine everything works i just don't have a signal and cannot change the address and can't load any engines. also took out the rf board and put a new one in with the antenna. i check out the 4 diodes they are fine.
