Skip to main content

My TIU have give up. I have revision L. I have checked the fuses and they seem ok. I power the TIU with an external power supply from MTH which checks out. The little red light on the motherboard will not stay on. Any suggestions. Finally if I have to replace the board what is the latest revision.

 

Original Post

Replies sorted oldest to newest

Don,

The little red light on the motherboard will not stay on.

Some questions:

  • Does the red LED not come on at all or does it come on and then go off? If the latter, how long does in stay on and does it blink a time or two before it goes off?
  • What is the external power supply and does it have a circuit breaker?
  • Have you tried powering the TIU from Fixed #1after unplugging the external power supply?
Barry Broskowitz posted:

Don,

The little red light on the motherboard will not stay on.

Some questions:

  • Does the red LED not come on at all or does it come on and then go off? If the latter, how long does in stay on and does it blink a time or two before it goes off?
  • What is the external power supply and does it have a circuit breaker?
  • Have you tried powering the TIU from Fixed #1after unplugging the external power supply?

Barry Thanks, my external power supply is an mth-500, using the ESP the red LED come on and goes off  in less than a sec. no blink  light only come on and then off.  Second I disconnected the EPS and connected 18 volts to Fixed # 1. I get the same red LED results, the light comes on and shut off in less than 1 sec. 

Add Reply

Post
The DCS Forum is sponsored by
×
×
×
×
Link copied to your clipboard.
×
×