A spill off the table and a repair is needed. I've been searching around for a power truck sideplate for my MPC GG1 engine and have not come up with anything so far. This is the plate that covers the 3 side drive wheels on the power truck and is held in place by two small screws. Any leads on where I can locate this part is appreciated.
Replies sorted oldest to newest
These are in left and right and won't fit any other way,
Try ttender, Jeff Kane did have these.
Good luck
Rod
If you have the screws, I might have the side frame...
Marty
If you have the screws, I might have the side frame...
Marty
I have the screws. I believe the power truck side frame is the left side as it has an L on the inside. If you have one to sell, please email me at dlagrua@comcast.net and I'll get a check off to you.
These are in left and right and won't fit any other way,
Try ttender, Jeff Kane did have these.
Good luck
Rod
Rod: Thanks for the lead. Jeff Kane in fact had the side plates. He was first back so I will order from him. I also thank Marty for the offer but since we found them, I don't need to trouble you. You guys are the best!
Recent production might bolt on.
try this site. i buy all of my parts from him at the train show in syracuse.
Access to this requires an OGR Forum Supporting Membership
