Skip to main content

Copyofth_BEHINDSIGN

This past week we got a great layout donation. The layout is on30 and 2 Rail O-gauge and is in 3 sections. Each of 3 sections are over 4ft wide and the height is 6ft. That makes it too large to get it through the doorways in the basement of the museum. We had a spot set aside downstairs however it would be against wall and would prevent viewing the entire layout. The VMT has agreed to displaying this in the museum upstairs. This layout will be fitted with plexiglass and placed on display upstairs at the museum.

20240910_134412

OGR Forum member Gilly along with other members from our sister layout organizations, the River City 3 Railers and Virginia Central & Piedmont HO Model Railroaders arranged for the donation.

20240910_13472420240910_134739

20240910_134924

The builder of the layout is on the right.

20240910_13560320240910_13493420240910_13504820240910_13505720240910_13520020240910_135225

Pictures

Scott Smith

Attachments

Images (13)
  • Copyofth_BEHINDSIGN
  • 20240910_134412
  • 20240910_134724
  • 20240910_134739
  • 20240910_134924
  • 20240910_135603
  • 20240910_134934
  • 20240910_135048
  • 20240910_135057
  • 20240910_135200
  • 20240910_135225
  • BEHINDSIGN
  • Pictures
Last edited by scott.smith
Original Post

Replies sorted oldest to newest

Here is something a little different. These are overall views of my layout taken from the stool that I often sit at at Port Royal. The first one is looking to the left towards Longfellow and the second one is looking towards Duncannon and the Pennsylvania Glass Sand plant at the right. Notice in the first image the restored Pennsylvania railroad pipe railing protecting the stair pit that allows access to the room by stepping down 32 inches below the layout

IMG_6235IMG_6236

Attachments

Images (2)
  • IMG_6235
  • IMG_6236
Last edited by PRRMiddleDivision

For this weekend, I ran two Long Island Rail Road passenger trains. The locomotives are LIRR #18 - a Lionel Legacy model (2131420, $649.99) of a Camelback 4-6-0 Ten-Wheeler steamer – and LIRR #462 – a special run MTH Railking model (30-20894-1, $399.95) of an Alco RS-1 diesel by forum sponsor Trainworld.

#18 was built by Baldwin in 1903 and retired by 1931. #462 arrived on the LIRR in 1949 and was scrapped in 1977. So, in reality, these locomotives never operated together on the LIRR, but this is Weekend Photo Fun, so anything is possible.

On my layout, #18 is pulling two elegant MTH wood-sided passenger cars and #462 is pulling three heavyweight steel passenger cars – also by MTH.

On the LIRR, #18 hauled high-speed Limiteds from Jamaica to the Hamptons on Eastern Long Island that were run by the most senior engineers. In 1924, the LIRR honored engineer James Eichhorn by painting his name on the cab of locomotive #18, as seen on Lionel’s model. By contrast, LIRR #462 worked as a switcher at Sunnyside Yard in Queens, NY, where my father used to take me to watch trains when I was a youngster.

The video shows the trains running through the double-tracked truss bridge on my 12’-by-8’ layout.

MELGAR

MELGAR_2024_0912_01_LIRR_18_462_12X8MELGAR_2024_0912_06_LIRR_18_462_12X8

MELGAR_2024_0912_25_LIRR_18_12X8

Attachments

Images (3)
  • MELGAR_2024_0912_01_LIRR_18_462_12X8
  • MELGAR_2024_0912_06_LIRR_18_462_12X8
  • MELGAR_2024_0912_25_LIRR_18_12X8
Videos (1)
MELGAR_2024_0912_14V_LIRR_18_462_12X8_THRU_BRIDGE_TOGETHER_23S
Last edited by MELGAR

Running with the Trackers this weekend at a fund-raiser to benefit the Noyes Children’s Library in Kensington, MD……lots of varied trains were running all weekend, reflected the varied interests of the group.

IMG_1631IMG_1633IMG_1634

I’ll bet you can guess who brought the Giraffe Train…..

IMG_1646IMG_1658IMG_1661

IMG_1671IMG_1698IMG_1689

Huge crowds…….and, lots of smiles!

IMG_1704IMG_1705IMG_1712IMG_1708IMG_1715IMG_1730IMG_1731

Have a great and safe weekend, everyone!

Peter

Attachments

Images (17)
  • IMG_1631
  • IMG_1633
  • IMG_1634
  • IMG_1637
  • IMG_1646
  • IMG_1658
  • IMG_1661
  • IMG_1671
  • IMG_1698
  • IMG_1689
  • IMG_1704
  • IMG_1705
  • IMG_1712
  • IMG_1708
  • IMG_1715
  • IMG_1730
  • IMG_1731
Last edited by Putnam Division

Thank you Scott for getting us going  for this fine weekend!  Here's my photo fun!   Have a wonderful weekend everyone!

Lots going on!   ... The chain gang is still working alongside Patsburg Ave at 3;30 pm .. hence the police cars.   The city trash crew has just parked their truck for the weekend since having been at it starting at  5 a.m. this morning ... they are now popping open some "cold ones.".   Towerman Smitty Spraguens takes a break out behind the tower, a NYC Pacemaker trailer is being picked up by a tractor , and an unloading crew is about  to finish up unloading the Western Maryland boxcar that sits on the team track.  All this goes on simultaneously this afternoon.  

IMG_2709

Early this morning a Western Maryland Consolidation is serviced before going out on the road.IMG_2582

Yesterday afternoon hosted a TOFC loading operation. IMG_2470

Meanwhile over on the caboose track we see Pennsy cabin cars set out.  IMG_2299

Attachments

Images (4)
  • IMG_2709
  • IMG_2582
  • IMG_2470
  • IMG_2299

Thanks.  This is my MTH Halloween train and all the cars were made by MTH.  There are still some out there on the bay. I have several Lionel Halloween trains I use on the Kids Layout for our Fort Pitt Division train shows.  I will have that set up with a Halloween theme at the show on September 28th at the Washington County Fair grounds.

@Hudson J1e posted:

I stopped by Trains 'N Things in Ewing, NJ.

THATS my shop! or, at least it was until I moved. I recognized the layout immediately. Tony and his daughter are awesome people, and I have purchased so much from them. I especially loved their sidewalk sales. I was last there in June when visiting family and ALMOST purchased a MTH Premier PRR steam loco, she was a beauty. I really miss having a quality train shop so close to home.

Mikki

@Mikki posted:

THATS my shop! or, at least it was until I moved. I recognized the layout immediately. Tony and his daughter are awesome people, and I have purchased so much from them. I especially loved their sidewalk sales. I was last there in June when visiting family and ALMOST purchased a MTH Premier PRR steam loco, she was a beauty. I really miss having a quality train shop so close to home.

Mikki

@Mikki I agree Tony and his wife are great people. Tony is the guy who got me hooked on scale models back in 1999. He has a great store and his prices are always reasonable.

@Randy_B posted:

I would love to see the track plan for that layout at Trains N Things.

I don't know for sure, but I doubt that they even have one, or should I say STILL have it. The son, Anthony, built it from what I heard, and it was somehow moved from the old shop in the same shopping center to the new one. I took many photos of it, thinking that I could recreate it but when I realized that I wasn't going in that direction I deleted them, just recently, sorry.

I guess that it wouldn't hurt to call them. Even if Tony is not there, his daughter, Krissy, is very knowledgeable but it is important to catch them when they are not busy. They usually do York, so they will be busy packing for that soon, I would imagine.

Mikki

@Randy_B posted:

I would love to see the track plan for that layout at Trains N Things.

It does seem to pack a lot of action in a small space if you just like to watch the trains run. It's definitely a great display layout for a store. They just let the trains run which shows the customer what the customer could possibly build and they don't have to stand watch over the trains.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×