where is the fuse located on the TIU?
Original Post
Replies sorted oldest to newest
inside
X-4
Be aware that the earliest TIUs (Rev G) have no fuses. These TIUs do not show any revision indication on the bottom. All the others do, and also have fuses.
Chris
LVHR
Ross Gerami posted:where is the fuse located on the TIU?
I did find the fuses and I replaced them and the red light is now on but i hook up engine and it keep saying check the track and I don't see anything wrong with the track.
plug in your phone 4 conductor cord to tiu and check dcs is set to fixed all channels are turned on. also check to see if remote is set to same number of blinks of tiu red led blink on tiu power up!
menu/system/dcs setup/aon on remote this will turn on dcs for remote to control trains from your remote, then try read command on remote and ity should find tiu and possibly engine that is on the track!
good luck and keep us informed as to your progress with you problem. if still don't work try tiu reset!
Alan
