I am updating my Christmas Layout with buildings and signals. I would like to find a decent 18-24 ga wire connector or plug to connect signals to the wiring harnesses already installed on the layout base. anyone have a fgood recomendation? i need three position, two position and possible 4 position connectors.
Replies sorted oldest to newest
I use the Deans MINI connectors from my LHC. Found in the RC department come in 2 to 6 connectors
Not sure this is what you are looking for, but here are some plugs I bought for multiple hookups.
I used coaxial plugs on all my buildings on my modules. They get setup and removed for every show. Similar to the ones used on the wall warts to power TMCC and Legacy bases. These for 2 wire. You could also use mini phone plugs. These come in two and three conductor. It might actually be better to use different style connectors for different conductor count. Two and three wire phone plugs can be plugged into either jack. Using different styles will make it easier to identify what goes where.
Pete
Access to this requires an OGR Forum Supporting Membership
