18226 engine need replacement for electro coupler damaged
part # 610-8551-551 , can not locate one
possibly someone knows the location of some
THNX
Original Post
Replies sorted oldest to newest
You have the wring part number - it should be 610-8221-551 - available from Lionel themselves: https://www.lionelsupport.com/...amp;CFTOKEN=96691968
Forum Sponsor @S AND W also has the part (under 8221-551): http://www.sandwparts.com/Parts%20List/6-XXXX-XXX.pdf
thanks for the info
sorry for my TYPO
ENJOY model RR
I have some of these in conversion kits, drop me an email and I'll give you a good price. 
Hi :
sounds like a possibility
the ones I need are mounting hole to closed knuckle end approx. 2.25 inches
the normal ones are approx. 1.75 inches
Thanks , Les 901chdr @ msn.com
Yes, they're the SD long couplers. They're actually about 2 3/4" long.
I have the upgrade set for the DASH-9 that has two couplers, and the PAL nuts to mount them.
Attachments
what does N CONN indicate on PIX # 1
Well, if you get them from Lionel, they don't have the connector. However, the kit I have has the contacts and the shells to plug them in directly. The reason the contacts are not plugged into the connector shell is to allow pulling them through small holes for installation. Once the wires are in place, you slip the contacts into the shell and plug them into the board.
what is $$
my details are in past correspondence and profile
you may EM me 901chdr @msn.com
My email is in my user profile if you want this.
