I have a MTH Santa Fe 2-10-4 (20-3056-1) with a PS2/5v operating system. The original speaker is suffering from poor sound and corrosion and flaking, so I removed it. There are a number of different speakers listed on the MTH parts site for this engine, but the exact same speaker is out of stock.
Would any of these speakers be a suitable replacement?
This is the bad speaker and the old battery that was in the tender…
Tom
Replies sorted oldest to newest
See notes on picture:
Should definitely only use a 16Ω speaker to replace original the 16Ω. With the original being 5 Watts, I suggest finding a similarly rated one. The 16Ω 2Watt pictured upper left would work, if it fits, but may blow because it's not rated for the same power as the original.
If someone else doesn't suggest a better option, I'll look for one later.
What diameter and depth is the original?
Upper right looks like ones I've been using. Verify 16 ohms with meter and go for it.
Jim
@SteveH posted:See notes on picture:
Should definitely only use a 16Ω speaker to replace original the 16Ω. With the original being 5 Watts, I suggest finding a similarly rated one. The 16Ω 2Watt pictured upper left would work, if it fits, but may blow because it's not rated for the same power as the original.
If someone else doesn't suggest a better option, I'll look for one later.
What diameter and depth is the original?
It’s the 45 mm diameter, maybe @ 10mm front to back…
Tom
Access to this requires an OGR Forum Supporting Membership
