Hi all,
By mistake I used Model Master black acryl paint on my Hudson's pipes so far it seems to stick,
I sanded the pipes with fine sand paper and it went on smooth and dried fast should I put a clear
coat on it as well?
Thanks
Tin
Original Post
Replies sorted oldest to newest
If it looks good I would just leave it. Clearcoat would not help it hold tighter to the surface under it and if its shiny and adhering well, I would not take a chance.
Before I clearcoated it, I would do a test on something cheap that the clearcoat worked well on the acrylic, with no problems. I've had clearcoat go bad on me or wrinkle the paint underneath before, even when its advertised as not doing that.
Thanks Lee, I did sand it down first and it appears to be holding.
Tin
