Adding a flickering led to LC firebox

LED Flickering Firebox Board

I have a track voltage powered version that will work in any locomotive with full voltage on the tracks.

I have added Evan Designs fire kits to multiple Lionel, Weaver, and Pecos River steamers. The kit works fine and runs directly off of track power. I suggest using the pico size fie kit. I used a small piece of brass or copper (plastic could also work) that I fashioned in the shape of the firebox door. I drilled tiny holes or cut an opening in the door. The pico LEDs where mounted on a clear piece of plastic and this was mounted to the backside if the door. Finally, this was then glued to the fire box. A couple of phots are attached.

@gunrunnerjohn posted:

LED Flickering Firebox Board

I have a track voltage powered version that will work in any locomotive with full voltage on the tracks.

Thanks John.  I'll keep that one in mind.

John

@Paul Duesing posted:

I have added Evan Designs fire kits to multiple Lionel, Weaver, and Pecos River steamers. The kit works fine and runs directly off of track power. I suggest using the pico size fie kit. I used a small piece of brass or copper (plastic could also work) that I fashioned in the shape of the firebox door. I drilled tiny holes or cut an opening in the door. The pico LEDs where mounted on a clear piece of plastic and this was mounted to the backside if the door.

The 7-19 volt version of this one I presume?  Is it multi-color?

https://evandesigns.com/produc...ariant=7523212591152

Thanks,

John

Yes, I used the 7-19 volt version.