Skip to main content

I had an engine derail on a switch, I did the kill all red button on dcs remote, powered down the z4000, unhooked the wiu from the tiu, plugged it back in around 30 seconds later, powered up the z4000. None of my routes are working now. They are there on the dcs remote and the android app, but they don't work. I made a new route on the dcs remote and it saved, but it doesn't work either. The individual switches work through the dcs remote and the app. Does anyone know what happened or if it can be fixed. Thanks.

Original Post

Replies sorted oldest to newest

Thanks Barry. I got it all working again. The WIU is more intertwined with the TIU than I thought. In addition to the steps you indicated, it was also seemingly necessary for me to power off and on the WIU, which I imagine you assumed that I would have done (though I didn't at first since I normally keep it powered on). Thanks again.

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×