Another TIU Issue

Dick,

B efor eyou can get volage out of a variable channel, you must assig to it a TIU track and turn the voltage up from the TR screen.

Alternatively, you can set the variable channels to Fixed mode of operation. In a few words, do the following:

• PresMenu/System and scroll to DCS Setup
• Scroll to one of the variable channels
• Pres soft key S5, FXD to put the channel into fixed mode
• Repeat for the other variable channel.

For all of the details, refer to page 45 of The DCS O Gauge Comapnion 2nd Edition.

This and a whole lot more is all in "The DCS O Gauge Companion 2nd Edition", now available for purchase as an eBook or a printed book from MTH's web store site! Click on the link below to go to MTH's web page for the book!

Thanks Barry.  I've already bought your book, but was looking for some additional guidance to narrow down the problem.  I never had my DCS operating fully so am now learning more.