I have inadvertently pulled out the antenna connection on my Lionel 6-18147 diesel. I need help in determining where that plugs into. I have enclosed a picture. Thanks, Jeff
Attachments
Images (1)
Original Post
Replies sorted oldest to newest
That'll be a single metal pin sticking up from the board. I'm guessing at the left rear of the board the way it's shown in the picture.
I do not see just one pin. There are two on the rear left and several in white connectors on the right side. I am concerned about experimenting as do not want to further damage electronics. By the way, the female connection from the shell is square, I have not located a square type pin. Obviously I am electronically challenged. Thanks, Jeff
I believe it’s the pin closest to the edge of the board. Here’s a picture of that same card, different engine, that shows the antenna connector. Check it over. Since the antenna wire isn’t connected to anything on it’s other end, should be safe. 
Attachments
Images (1)
Yes, I can identify that! I will be connecting and testing tonite. That’s a great help! Thanks so much. Jeff
Attachments
Perfect! It works! Thanks so much for reply’s, great to know folks willing to help. And thank goodness for y’all! Did not get help from other sources.
Jeff
