Skip to main content

Living in West Virginia and a county that logged more lumber than almost anywhere.....I felt the need for some log carrier cars.  None of the current cars on the market met my criteria as far as type and/or price. So I decided to make my own....which I enjoy more than buying any way!

Here we go..............

I used some Basswood for the main assembly or frame. I had some pics of cars with a frame of large wood beams....I'll make my own version in O scale. The center frame is made from 3 1/4 by 3/8 Basswood about 30 scale feet long. I glued them together, wrapped a number of rubber bands and set overnight. I then used a Dremel table saw to plow out the 1/4" wide 3/16" deep spots for the cross braces.

 

DSCN0824

 

Added the cross supports. Made from 1/4" by 3/16" Basswood stock.

 

DSCN0825

 

I now added the plastic details. Grandt Line NBW castings, Plastruct channel and strip stock for the log retainers. Brake wheel support was added along with more Grandt Line NBW details. Brake wheel was a old MDC HO scale part I had on hand.

 

DSCN0826

 

I now dipped into my stock of plastic Lionel Archbar trucks. I bought these, when they were available, as they were often $3 a pair or so at shows. I like them.....drilled a hole in the center beam and attached the trucks with a sheet metal screw.

 

DSCN0827

 

I prepped the car with some light sanding and some dings and dents. The paint is Dupli-color 'Hot Rod Primer' a dark gray color with some filling properties. It gives a nice weathered black color to the car. I weathered the car with water based light gray, rust and black thinned with alcohol. The trucks got a dry brush with gray. The number was made to look hand painted.....and is made with 'correct-o-type' if you're old enough to remember it!  It will get a coat of clear flat to seal it all up.

 

DSCN0831

DSCN0829

DSCN0830

 

One down and 4 to go on this run. I make all the parts needed at one time for 5 cars.....then assemble them like kits. When I get all the cars complete I will cut some Black Walnet limbs into 25 foot lengths and load the cars. I have scale chain and retainers for them ready.  I will more than likely make another run of 5 cars but need to order more Grandt Line parts before I can.

Now the REALLY hard part begins......the hunt for a big Shay to haul my fleet of log cars!!!

Attachments

Images (7)
  • DSCN0824
  • DSCN0825
  • DSCN0826
  • DSCN0827
  • DSCN0831
  • DSCN0829
  • DSCN0830
Original Post

Replies sorted oldest to newest

Originally Posted by Southern Railway Sean:

Good Looking loging car Dave. I see the Dave Model Train Company been busy making new rolling stock!!

So I must have told you MY dream if I ever win the lottery!!!!  I often drive by a good size building near my house. It was built for a company that went belly up right before it was finished.  I see myself going to work there daily, manufacturing trains!

Originally Posted by coloradohirailer:

I sure miss that supply of archbar trucks!  Nice..I will need to come up with some of

those to feed my sawmill and creosote plant.

I miss them too......I was lucky to buy a bag of about 20 for $1 each!!  But I've built a number of cars and my supply is running low. How do we get Lionel to make more!?!?!?!?

Originally Posted by Burlington Route:

Dave...nice job! Wish I had a stash of trucks like that...{crossing my fingers since my son and I are going to the train show tomorrow}.

One of the greatest bargains I find are beat-up cars with cracked bodies, etc., but good working trucks.  I just pick up a bunch anytime.  There is a TCA sponsored meet at the NC Fairgrounds tomorrow and if I can get to it I plan to look for about half a dozen like that.

Wow looks like many are on the same track here. When club built a logging line I decided to make a few log cars plus some other Logging cars to help haul supplies and people up the mountain.  All scratch built and using Weaver plastic trucks. I just made 4 additional log cars and the flat car when I recently purchased a MTH Climax.

Dave

Your models are outstanding. I kept the construction a bit simpler and they work just the same.

 

Lee really nice log cars

 

Here are pics of what I built - enjoy - Steve

log cars 001

log cars 002

log cars 003

log cars 004

log cars 005

Attachments

Images (5)
  • log cars 001
  • log cars 002
  • log cars 003
  • log cars 004
  • log cars 005
Originally Posted by Dewey Trogdon:

Really impressive work Dave.

No longer having the skill and capability, I have to go with the store-bought cars.

 

Nothin wrong with store bought!!! I have a lot of supplies on hand....and I enjoy building.....otherwise I'd not mind a set of those Lionel cars with the big log loads!!

Thanks for all the comments.

Post
×
×
×
×
Link copied to your clipboard.
×
×