Skip to main content

I have about 500 sq ft of open basement and I am wanting to build my first large layout.  I am new at building a layout, and would like to incorporate a roundhouse, coal/water facility, yard, some industry with city, and long scenic run, multi layered.  and designs would be greatly appreciated.  Will be using MTH DCS and Lionel Legacy, along with wifi and tablets.  I have four 20 amp circuits ran to the room.  I have one MTH 4000 and a few lionel bricks.  you can contact me on here or at my email:  rmkricko@embarqmail.com

Original Post

Replies sorted oldest to newest

My layout is in a 28' x 14' (living/dining) room and is a dual-mainline, around the wall with a center peninsula.  The main viewing/operating aisle is 3' wide, and the rest are 2' wide.

The yard occupies the entire 4' wide peninsula.  Six feet would be the maximum width one could realistic do if more space was available, and should give one room for a turntable, etc.

Jan

Original Living Room Layout Approx

Attachments

Images (1)
  • Original Living Room Layout Approx

I use 3 channels on my ZW; one for each mainline, and one for the yard.  The fourth channel runs everything else.

I'm working on a redesign that adds staging under the track on the top which results in a third independent loop.

I will be able to run three independent trains (excluding the yard) with one on each loop, or one train going three times around which doesn't cross over itself.  It would  be a train 225 feet long .

A 180w brick can support two trains unless you have something (like incandescent lights in passenger cars) drawing more than its share.

Jan

Add Reply

Post
The Track Planning and Layout Design Forum is sponsored by

AN OGR FORUM CHARTER SPONSOR
×
×
×
×
Link copied to your clipboard.
×
×