Skip to main content

We recently moved.  As part of the move, my trains and Legacy system were placed in temporary storage for three months.  The batteries were removed.  It was boxed in its original box and then inside another substantial moving box.  There was no physical damage visible to the boxes or the remote when we retrieved them from storage.  

Tonight we unpacked the Legacy system, connected it, powered up the base, installed the batteries in the remote and allowed it to charge until the indicator LEDs on the base turned green.  When we press the CTC button to turn on the Cab-2 remote...nothing.  Tried two other sets of rechargeable batteries, no go.  Then tried normal alkaline batteries as a last ditch option.  Nothing.  

We probably pressed the CTC button over 100 times.  Nothing.

Any similar experiences?  Any advice on things we might try?  Of course, this happens at just that time of year when I need the system most.

Thanks, in advance for any help you can offer.

Ron

Original Post

Replies sorted oldest to newest

Thanks, Doug.  That is the reset button.  We've tried that several times.  I suspect it may be a failed switch.

I actually stopped by Nicholas Smith Trains as I knew I was headed that direction and both Joe and Chris fiddled with the remote for quite some time.  We all came to the conclusion that it needs a trip to Lionel.  I've emailed Lionel Service for a return authorization.  Looks like I'll be without my Legacy for Christmas.  Sigh.

Ron, living on a lesser CAB.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×