Skip to main content

I have a Cab 1 remote that the red wheel spins very freely and doesn't get good control.

I opened it up and compared it to another cab 1 that spins nicely. I noticed at the bottom of the shaft, below the black ring that the signal passes through is a small washer.

On the one that spins fast and loose the washer was much much smaller.

Is there a good way to remove the red wheel so i can pull out the shaft and replace the washer?

Also, does anyone know the correct part for the replacement washer?

Thanks!!!

Original Post

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×