Skip to main content

Closed2 replies

Can a Smoke Unit be Added to MTH R/K ALCo RS-3?

C CNJ #1601OGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER
MTH is now producing it's RailKing PS-3 equipped ALCo RS-3 diesels with a smoke unit.  This wasn't the case in the past.  As the title of this thread states, I'm wondering if any authorized MTH Techs and/or other knowledgeable Forum members know if a smoke unit can be added to a prior PS-2 equipped R/K RS-3 or RSD-4.  If so, would it be fairly easy to install (e.g. plug right in to the existing PS-2 boards), or would it more complex than that?  I realize the exhaust stack would also have to be drilled out.

Has anyone done this yet?  I have a couple recently-purchased older RS units that I would like to add smoke units to.  After all, what's an ALCo diesel that doesn't smoke??!!
Last edited by CNJ #1601
Original Post

Replies sorted oldest to newest

G GGGOGR Forum Member

Yes, the wire harness can be plugged into the existing PS-2 board.  The issue is location and mounting.  Is there room for the smoke unit at the stack area.  The frame needs to be drilled so the smoke unit can be mounted to the chassis.  At that point finding the right brass cup/funnel to match to the exhaust stack.  If you take a picture of the internals of your engine I can tell you if it is feasible. 

 

I have done 3 recent Atlas Diesel Upgrades to PS-2 and smoke from TMCC/RS.  I add the smoke unit first and than place the boards in the remaining area.  G

Last edited by GGG
Views: 439
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×