Hoping someone can point me in the right direction. I have a couple of Williams 70 tonners that I'd like to upgrade to command control, either ERR or PS2/3. Anyone here know of someone who does upgrades? Thanks in advance. 
Replies sorted oldest to newest
Talk to GRJ (or Gun Runner John) on the Forum. He does conversions and/or has some real good contacts!!
FREDSTRAINS
Well, a PS/3 upgrade isn't going to happen, no flywheels!
Here's my Williams 70-Ton engine with TMCC and RailSounds. I used the ERR Gas Powered Doodlebug sound board, I thought this one needed the sound of a smaller prime mover. 
Not even sure why ERR makes a "gas powered Doodlebug" sound board. Most Doodlebugs were converted to diesel engines after a few tragic early gasoline fires due to wrecks. A "smaller diesel sound" would be a lot more versatile for engines such as this, most Doodlebugs and RDCs...
@Magicland posted:Not even sure why ERR makes a "gas powered Doodlebug" sound board. Most Doodlebugs were converted to diesel engines after a few tragic early gasoline fires due to wrecks. A "smaller diesel sound" would be a lot more versatile for engines such as this, most Doodlebugs and RDCs...
Well, they make it because it's one of the few sound sets they're licensed to produce! There are tons of sounds I'd love for them to have, but that ain't happening!
@gunrunnerjohn posted:Well, a PS/3 upgrade isn't going to happen, no flywheels!
Here's my Williams 70-Ton engine with TMCC and RailSounds. I used the ERR Gas Powered Doodlebug sound board, I thought this one needed the sound of a smaller prime mover.
John, that video was my inspiration! Would you be interested/willing to do a couple more? (compensated, of course). I don't have any background in electronics so I'd be a fool to try an upgrade myself.
Access to this requires an OGR Forum Supporting Membership
