Configuring legacy F-3 A-B-B-A

Paulie DOGR Forum Member

Does anyone know the proper procedure in setting up an F3 MU. they are as follows. Pwr-a pwr-b non powered-b and dummy-a with lights and smoke only. Should I set them all to same Id or give multiple Ids and create lash up? Thanks all

11/30/146:51 PM

❤️ 0

Original Post

Replies sorted oldest to newest

MartyEOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBERMEMORIAL SUPPORTER

Mine are setup as unique IDs built into a TR (Train).

11/30/146:53 PM

❤️ 0

JohnBOGR Forum Member DIGITAL SUBSCRIBER

Paulie D,

Like MartyE said, set up each unit with it's own ID number, then put them into a Train ID (TR). That way the rear A unit can be faced in the opposite direction in the ABBA configuration. If you use the same engine ID in all four units both A units would have to face forward.

JohnB

11/30/147:09 PM

❤️ 0

Lee WillisOGR Forum Member

I run only conventionally but that four-set runs fine for me.

11/30/1410:14 PM

❤️ 0

CLICK HERE and Subscribe to the OGR YouTube Channel!

Configuring legacy F-3 A-B-B-A

Add Reply

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!