Skip to main content

Hi Everyone,

 

I have a question, I want to wire 3 Lionel yard lamps under the platform to a terminal strip (Radio shack), ok so once the

power and commons are connected, do I now take 2 wires to another pair terminals to my power source to get power to the strip?

Also, if you are have say 2 or 3 wired terminal strips, how do you connect each strip so continuity goes through all the strips? A pair of wires from one to  the next?

 

Thanks -Hopefully this all makes sense

Original Post

Replies sorted oldest to newest

MTH sells Terminal Blocks in 12 and 24 positions.

These are internally wired so you put in power at the end terminals and every pair is powered for use. + down one side - down the other.

I have a couple of the 12 pair sets, they work well and are easily mounted to the benchwork.

Handy for our type of wiring.

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×