CW80 Transformer Short

I'm not recommending you dive in to do repairs, but if you need to:

ATKTR4 Triangle Screwdriver Set

I have successfully made the repair you have outlined by taking a little material off of the Bell button.

Thanks for the info. I'll try to be very careful.

Woody

Harbor Freight tools sells a 20 bit security driver set.  10 bucks as I recall.  I don't buy "real" tools from them but for disposable one shot types, they're OK.  Those bits will get you into a CW80 as well as that one funny screw on your microwave oven when you want to change the fuse.

I have one of the bargain-basement sets of security driver bits, and often find that they come in handy.  

For those places where the access hole is long and narrow, and the standard bit-holder wont fit, it's fairly simple to use a hacksaw, or a Dremel tool with a cutting disc, to cut a slot into the back-end of the bit so that you can drop the bit down the hole, and then use a standard flat bladed screwdriver to turn it. 

Thanks for the help. Going out today to get a set. Merry Christmas to all and a happy New Year.

Thanks

Woody