Hey Guys,
Back again. Ok, so now I'm looking to run the DZ-1000s connected to my Atlas switches using the Lionel ASCs. I have 8 atlas switch/DZ-1000 combinations and 2 ASCs.
To power the ASCs, I need to daisy chain them. The instructions on that are pretty clear - so I don't see any issues. I guess we'll see.
In the video to connect the DZ-1000s to the ASCs, it looks like there is a transformer ground wire going to the COMM terminal on the ASC and then a jumper to the second COMM terminal on that same ASC. This will manage 4 of my switch combinations.
For the remaining 4 switch combinations, do I need to run a separate ground from the transformer to that second ASC COMM terminal and them a jumper to the second COMM terminal on that second ASC? Or can I run a jumper from one of the COMM terminals on the first ASC to one of the COMM terminals on the second ASC? Assuming the jumper would be from the middle COMM terminal on the first ASC to the right COMM terminal on the second ASC. Yes?
Thanks for your support. You guys have been really helpful.
Jef
