My dcs picks up the engine and adds it.
however when I shut it off and try to restart it it won’t start unless I re add it again. I have many Mth engines and never had this happen prior to this.
Any suggestions are welcome!
Original Post
Replies sorted oldest to newest
Sounds like the battery is low on charge and won’t keep its ID active. Change the battery and you should likely resolve this issue.
Agree with Jeff. Does the engine complete the shutdown sound sequence when you power off the engine with the sounds on? This sequence should last about 10 seconds. If not, that confirms a bad (or very discharged) battery.
Thank you guys! I’ll get a new battery and give that a try. Hopefully that will cure the problem. As soon as I get one I will let you know.
