DCS Track Voltage - Variable Channel

IIRC you can do that with the remote though I've never attempted.

Steve,

On the remote:

• Press TR.
• Highlight the variable channel's TIU Track and press the thumbwheel.
• Press soft key 5, "->"
• Press soft key 2, "MTV". "Start Volts" should be highlighted. Press the thumbwheel.
• Use the thumbwheel to scroll up the starting voltage. Press the thumbwheel when the desired voltage is displayed.

Now, the first click up on the thumbwheel will go from zero to the voltage that you set.

This and a whole lot more about DCS is all in MTH’s “The DCS Companion 3rd Edition!" This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at MTH's web store!

Thanks Barry.  Is this in one of your books.  I hunted but I couldn't find it.

Steve

Steve,

Is this in one of your books.  I hunted but I couldn't find it.

It's at the bottom of page 34 in The DCS Companion 3rd Edition.

Barry Broskowitz posted:

Steve,

Is this in one of your books.  I hunted but I couldn't find it.

It's at the bottom of page 34 in The DCS Companion 3rd Edition.

Thanks Barry, I'm going to highlight that in my book