What is the Best way to shut down the Sensor Track Temporarily for a short time ( and not lose the programmed program ) . And be able to bring it back on line with the same Program!
FREDSTRAINS
Original Post
@Fredstrains posted:What is the Best way to shut down the Sensor Track Temporarily for a short time ( and not lose the programmed program ) . And be able to bring it back on line with the same Program!
FREDSTRAINS
I'm not sure what you are asking but programming it to action zero will stop it from running any of the preprogrammed scenarios.
or maybe this...
SLEEP One SensorTrack
Press and hold PROGRAM and RECORD for 2 seconds.
Both LEDs flicker and go off when buttons are released.
This SensorTrack will:
• no longer play preset actions or user recordings when locomotives roll-over,
• terminate a currently playing user recording,
• exit record-armed or program mode if active.
SLEEP ALL SensorTracks
Press CAB buttons ACC, 99, AUX1, 0
Wake One SensorTrack
Press and hold PROGRAM and RECORD for 2 seconds.
Both LEDs turn on until buttons are released.
When you WAKE a SensorTrack, all normal operation is restored, but activities interrupted by
SLEEP are not resumed—they must be re-triggered.
Wake ALL SensorTracks
Press CAB buttons ACC, 99, AUX1, 1
