Ditch lights on legacy

I did the same. I forget, but it's something like the options under aux2 or maybe just the first menu under lights options.

hold down the aux2 button for three seconds and the light screen will show up. look on page 84 of the legacy handbook.

http://www.lionel.com/media/se...7V15LEGACYManual.pdf

the heading on the page should be 1.51

the manuel for my ace is the 2008 one for the UP ace and does not talk about doing things with the ditch lights.  Now with my 1.51 software there are things on diesels with lights that can be changed that could not be before.  I emailed M Reagon and he got back to me right away and told me to go to the aux 2 menu and use the two buttons in the lower left corner to do the ditch lights.  now all I have to figure out is how to get my two ground lights back on and I have it figured out.

Ditch light are on that menu as well.

The 1.51 software and he LSU allow you to set light options that were not easily available before. Play with it and have fun

The menue that comes up with the SD70ACe has the lights On

and OFF in the lower left corner. Pressing the ON and OFF will

toggle the ditch lights between Ditch lights On,Off, and flashing.

Above the display, there is a display that will show the ditch lights

state,On, Off, Toggle. The display is hard to read and you have to

press the on/off buttons a number of times before the ditch lights

will flash. Pressing the On/Off buttons will toggle the ditch lightd

between On, Off, Flashing. Press the On/Off buttons and then try

the ditch lights.

the manual I linked above is for 1.51.  has nothing to do with engine manual.