Double-Heading the LC+ 2.0 0-6-0T Locomotives

Very cool! How are controlling them? If you were using the Lionchief remote or Bluetooth would activating the whistles cause both whistles to blow?

They're running with TMCC, I almost never use BT or the LC Remote.  Besides, since they're dissimilar units, they wouldn't MU unless I use TMCC.

Ok. I see now they have different numbers. Still, very cool.

John, I'm glad you're finding time to play with... oops I mean run your trains.

John, very cool !!! Really enjoyed it.

I was wondering if you could put one as a pusher in front of the caboose?

Ron H

@SteveH posted:

John, I'm glad you're finding time to play with... oops I mean run your trains.

What's your mouth Steve, this is serious business!

@Ron H posted:

John, very cool !!! Really enjoyed it.

I was wondering if you could put one as a pusher in front of the caboose?

Sure, it makes no difference where they are on the layout, when you configure them as an MU, they run synchronized

Very cool John. Three plus minutes to do a full lap is a nice run.

And yes- It's nice to see you so hard at work on the layout.

Bob

@RSJB18 posted:

Very cool John. Three plus minutes to do a full lap is a nice run.

Actually, that wasn't the full lap, they still had to go around the lower loop in the workshop to be back to where the video started.   I calculated they were going just over 15 scale MPH, probably as fast as the real prototype 0-6-0T ever ran.