Hi all, as I stated, I accidentally dropped my Lionel legacy remote today, and now it seems as though the brake is stuck, so the train won't run. I tried several times to get it back into a normal position, but it still thinks I'm applying the brakes. I also took out the batteries from the remote and put them back in and turned it off and back on, then unplugged it completely, then back in, all to no avail...any suggestions? Thanks.
Replies sorted oldest to newest
You can try a reset, too. There is a small button to press and hold in. I don't recall where. Worth a try anyway. I'm sure someone can be of more help about how to do that method. Good luck.
Otherwise, Lionel has a pretty fast turnaround lately for repairs.
I believe the reset is on the back...a small unlabeled hole on the right top with a button down in the hole...one of those paper clip things.
I tried the reset button with no luck, but thanks for the suggestion.
Lionel will fix it for you. But if you take it apart, most of the buttons can fall out of it...I would support it resting on its front I think and take a look.
Are you sure you're not confused on the brake? All. The way down at Plus is full brake.
Or is it the brake roll button that's stuck. Does it feel normal?
Thanks for your help, but I managed to play around with the boost-brake button enough to fix it!
Sounds good. Unstuck, eh?
Access to this requires an OGR Forum Supporting Membership
