Hello Everybody,
need a little help with a conversion. I have an MTH 20-3107 PRR Duplex steamer with the early ps2/3v setup with the 2 aa batteries in a holder. This is in the tender. I have a BCR2 that I was going to install until I discovered that there is no place for it to plug into. The black and red leads from the factory battery holder are wired directly and soldered to a small board. So I'm thinking to just cut the black and red wire leads from the battery holder and fit the ends of the wires into a ps2/3v two pin connector that MTH uses, and the BCR2 would plug into that. Problem is that there are no parts drawings for this engine on MTH's website nor can I find any information on the part number for the connector. haven't been able to get in touch with MTH this week. Does anyone know what the ps2/3v two pin connector part number is or anyone have one(or two-in case I screw one up) that they might have available for sale.
Thanks, Nick