I have an 072 command control Fastrack switch that, most of the time, will not operate in command mode but sporadically it will. When it does it usually takes 2 pushes of the button to go from straight to turn or vice versa. Any suggestions would be appreciated before I consider sending it back to Lionel. I have 7 other CC switches that work flawlessly.
Replies sorted oldest to newest
BradFish1,
Try reprogramming the switch into your Cab2 or Cab1 again, make sure you hold down the program button long enough for every thing to work correctly, and make sure your CC switch is making proper contact with your other track, if you are operating on track power. From what I understand every once in a while Lionel delivers a faulty switch also. I have been lucky so far and have no bad switches at this point, I have a couple new ones to add this year and picked up a couple from the guys here on the forum also, we will see what happens with them on the new Christmas layout.
Good luck with your switch.
PCRR/Dave
I forgot to mention now it won't go in to program mode. It did when I bought it back in April.
Return it to Lionel.
Access to this requires an OGR Forum Supporting Membership
