i got this idea off of eBay. Lionel sells the small piece that has the red wire making the power connection. Remove the wire and you can create a siding. I’m getting too lazy to run all these wires so I thought this idea on eBay was brilliant. He made it look nice...I did it easy. He added a stand and ran the power thru the switch. I actually used the red wire from the piece and an extra one, drilled hole thru the fastrack and I didn’t solder or anything. Granted it wasn’t flat but I had the ability to remove a little foam under the track so it was flat. When you look at pics, you’ll see his and my lazy way. His way nicer but mine was quick!!
Attachments
Original Post