Skip to main content

I built this to go in a corner. I wanted it to look massive and fit against the background. I am planning to cover it with corrugated aluminum. It took about 2 1/2 hours to build this.

Malcolm

 

20131122_4

20131122_5

20131122_6

 

New pics of corrugated siding being installed and corrugating tool.

 

I did this today while smoking a turkey, venison tenderloin and sausage. Smells real good around the smoker.

 

20131127_1

20131127_2

20131127_3

Attachments

Images (6)
  • 20131122_4
  • 20131122_5
  • 20131122_6
  • 20131127_1
  • 20131127_2
  • 20131127_3
Last edited by Brother_Love
Original Post

Replies sorted oldest to newest

Malcolm,

 

Looks absolutely terrific!

 

I really like foamcore and have used it for my large 3D backdrop buildings (below).  All structures in the photos are foamcore over a wooden framework with Plastruct and Evergreen styrene sheet exteriors.

 

 

Blooming_Mill_007W

 

 

2011-01-05_006W

 

 

BLM_003W

t8afao - I used Elmer's and plastic cement for the foam.  You can't use the plastic cement or CA on the foam innards - it will melt the foam.

 

Malcolm - what glue did you use?

 

George

Attachments

Images (3)
  • Blooming_Mill_007W
  • 2011-01-05_006W
  • BLM_003W
Originally Posted by Brother_Love:

This is the look I am going for. I have several photos that I made too. This was was made by David Howe. The mill has no rail service now although the rail is still there.

Malcolm

 

Those kinds of buildings are common in my neck of the woods.  Many of them are concrete since I live close to the "cement belt".     They have metal roofs and wood or metal supports for overhanging roofs like the one over the dock.   They weather to various shades of grey ranging from light and dark grey to a  to almost yellowish white.

 

Would be easy to model in the manner you are doing.

 

 

I started making the corrugated siding today. I am using Reynolds extra strength aluminum foil. The process involves laying the pre-cut strips on a piece of J&T corrugated styrene and then forming ridges with the "corrugating tool". The Reynolds is pretty thick and holds the corrugations even with handling.

 

I am going to use Crafters Pick latex adhesive. It works very well when used as a contact cement. I tried it last night and I was unable to remove the foil without removing the paper from the foam-core as well. No photos today but I will have some tomorrow.

 

Malcolm

Originally Posted by DaveJfr0:

Is wood really needed to back the foamcore?  Why build with foamcore and not masonite or some other thin structural material?

Dave,

 

To answer your questions:

  1. Yes.  In large structures like my mills, foamcore will warp without wood frame backing.  But only a minimal framework is needed.
  2. Materials like masonite are harder to work with than foamcore.  It is much easier and quicker to make a precision cut with a metal ruler and a razor blade (foam cutter) than use a hand saw or saber saw to cut masonite.  And it's harder to get a precise cut with those tools as well.

I think I need to explore putting up my foamcore clinic someplace.

 

George

Originally Posted by DaveJfr0:

I agree, that powerpoint was helpful.  That is a neat edge-cutting tool you have…looks like its attached to the ruler.

Dave,

 

Thank you.  By the way, the tool is NOT attached to the ruler.  I simply used a metal straightedge yardstick.

 

The tool is called a Logan Straight Cutter Model 701.  I got mine at A.C. Moore, a craft store.  It's a bit pricey ($25), so I suggest signing up for their weekly e-coupons and buying it at 50%.

 

George

Originally Posted by leavingtracks:

Tried everything to open the powerpoint but to no avail....I don't have power point but did try Open Office and a few others but could not get it to open...

 

Alan

Hmmm.  Alan, you don't need Powerpoint to use the file.  It should have opened with a double-click.  If you still don't have any luck, shoot me an e-mail (gpandelios@verizon.net) and I'll send you a copy tonight.

George

Originally Posted by DaveJfr0:

foamcore clinic would be interesting as I look to also build some of these custom buildings rather than just put on fronts and kitbash kits all over the place.

 

Not to steal malcolm's show, but what thickness wood is needed for the frame?

1/4" poplar craft wood (1/4" x 2" x 3' at Home Depot or Lowe's) is what I used. 

 

Oh, Home Depot also sells wooden yardsticks for $0.88.  Those would also work and they are cheap!

 

George

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×