Hi Guys - today I had to do an emergency stop using my MTH remote - the remote now reads "Reset TIU and Remote Power". I have Barry's book but can't find a remedy for this problem. If Barry is out there or if any of you have had this problem I am asking for your help.
Paul
Replies sorted oldest to newest
Paul,
You just need to turn off the power to the TIU. turn off the remote, and turn them back on again.
John - I'll give it a try
Hey John - I disconnected the power to the Aux Power Inlet on the side of the TIU then turned my remote off. Then reconnected the power and turned my remote on - tried to start an engine and the only thing that appeared on my remote was "start up". No luck so far.
Paul
Try doing a "read" and then tell us exactly what is on the screen.
Try it again Harley..... turn remote off, disconnect tiu aux power supply. and unplug your transformer as well. Fixed 1 needs to be shut down.
SUCCESS! thanx John and Gregg - tried it a second time and trains are up and running!! Always can count on our great forum members!
Thanx again,
Paul
Access to this requires an OGR Forum Supporting Membership
