Help remove frame from Lionel #6-18790 Dockside Switcher

@TC8436 posted:

Need some help to remove the frame from my switcher, I thought there were only 4 screws to remove but still can't seperate the frame from the body. I know there's 2 screws at the rear that I removed and half of the frame is released but after removing the  the 2 forward screws it's still securely fastened.

  Any suggections?

@TC8436, You are correct, remove the  2 screws at the rear of unit/body, then I believe the other 2 are located in front of locomotive in the recessed pocket near the front pick-up roller.

I have removed all 4 screws but still can't remove the frame, any idea what else is holding it in place?

Bottom front of the switcher, which screws did you remove,

I tried to draw arrows to show the 2 screws I removed, the ones in the recessed pockets.

@TC8436 posted:

I tried to draw arrows to show the 2 screws I removed, the ones in the recessed pockets.

Any luck removing the shell, You should be able to lift it off as far as I know, Frank