Hello,
I have a Lionel Erie Berkshire with railsounds and a wireless drawbar.
The chuffing is not working
I tested the switch that is under the motor and hits the cam on the flywheel . THe switch has continuity but still will not chuff,
the fan driven smoke unit smokes fine,
Is there any advice that can be passed to me
thanks
Bill
Replies sorted oldest to newest
Reset R2LC, if that doesn't work then swap R2LC assuming this is a TMCC RS4 engine and the tender other functions including light and coupler work. G
Are you sure the chuff switch is actually making and breaking? If other functions like whistle/bell and couplers work for tender sounds, the chuff switch is by far the top suspect.
Access to this requires an OGR Forum Supporting Membership
