Looking at purchasing a new MTH DCS Commander or Remote . My question is does it work with all PS2 and 3 engines. I've watched enough videos to know how it works however no one covers what engines will work on this system. I've seen some articles that say 5v PS2 engines won't work and then someone says they will. Any help is deeply appreciated, Thanks
Gary
Replies sorted oldest to newest
Gary,
All DCS engines will work with the following:
 | This and a whole lot more about DCS is all in MTH’s “The DCS Companion 3rd Edition!" This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at MTH's web store! |
 | This and a whole lot more about DCS WiFi is all in MTH’s “The DCS WiFi Companion 2nd Edition!" |
DCS Remote CDR will run one engine that has been factory reset to default address. It inputs AC power and puts AC power to track.
If you go with the DCS Commander, it can run more engine simultaneously, but it inputs AC and output DC power. It is designed to run HO, but will work with O but the power out is limited and you have to decide to run DC power to the track. G
Thanks for the information this was very helpful.
Access to this requires an OGR Forum Supporting Membership
