Skip to main content

I am trying to convert my battery to a YLB in my S-3 tonight. However, I do not see a wire nut to attach the red wire, which is actually too short. The wiring is in quite a bundle. If I undo this bundle, what do I look for, if I am to find the wire from the roller(s)?  I'll attach a close up of the wire bundle. Thanks.

 

 

 

Attachments

Images (1)
  • S-3 wiring
Original Post

Replies sorted oldest to newest

I looked at the wires again on the S-3 and silly me forgot about splicing into the other trucks pick up roller. This would also make the red lead wire from the YLB long enough to do the job. Is this OK to splice in there? I will send photos. The wires from the pick up roller are black and gray. One screw right above the roller is the black roller, the other gray goes to the other screw, maybe this is the ground. (?)

Attachments

Images (3)
  • S-3 tender wiring
  • S-3 tender wires pick up roller
  • S-3 tender wires truck
BigJohn&theWork posted:

Were can one purchase a YLB?

YLB RailSounds Battery Replacement

wb47 posted:

for us dummies, what is a YLB?

Permanent battery for any Lionel Railsounds Equipped Locomotive No worry, no leak battery. Never replace a battery again.

  • Directly replaces your Alkaline battery
  • Track charged and never needs replacement
  • No chemicals to leak and damage your equipment
  • Works with Conventional, TMCC or Legacy locomotives
  • Easy one wire installation
  • Fits in any locomotive with space for the backup sound battery

Attachments

Images (1)
  • mceclip0

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×