Skip to main content

Going thru the app and building a lash-up appears to work ok.  Selecting two PS3 engines one as the head and a second one as the tail with forward direction set on each. The lash-up comes up on the app and both engines will start.  It will sometimes drive both engines and the train moves and other times it appears only the forward engine is driving (train doesn't move) but you can see the front engine squat. 

When it finally moved it made several trips around with no problems. Stopped and it won't start moving again 

Next line over is a 5 unit running just fine so I'm pretty sure I have the settings right.

 

Last edited by Rich Melvin
Original Post

Replies sorted oldest to newest

Barry

Just a followup. I reported it to MTH and they appear to have done the lash up with success so I moved the Trainmasters to a different track. At first I had 3 or 4 failed lash ups with the Premier FM going inactive but finally connected everything and it's been running for 15 minutes with no problems.

Tomorrow I'll try moving it back to the track where the problem occurred and see what happens. All the track is pretty dirty if that could enter into the problem. I didn't think to check the track signal....that's what I use you guys for

Add Reply

Post
The DCS Forum is sponsored by
×
×
×
×
Link copied to your clipboard.
×
×