There is a lot of play in the front truck & motor,this causes the flywheel to rub on the back sides of the horns on cab. Got any ides?
thank you Monk
Original Post
Replies sorted oldest to newest
The screw at the bottom of the truck is loose. Tighten the screw. If that is not it, remove the motor and tighten the 2 screws that attach the motor to the mount. They might be loose. G
Originally Posted by GGG:
The screw at the bottom of the truck is loose. Tighten the screw. If that is not it, remove the motor and tighten the 2 screws that attach the motor to the mount. They might be loose. G
This was not one of those times that you think your getting something to tight.
Thank you Monk
Best to rotate the fly wheel as you screw it down. If really loose sometimes you can jam the gears if the motor is cocked. Glad it was simple. G
