Can some one provide a suggestion to fix a problem with one of the pantographs on my JLC GG1? It goes down but not completely flat down. Can you safely remove the pantographs with the supplied wrench and remove the engine shell to make adjustments or apply grease/oil to fix this?
Replies sorted oldest to newest
This is an easy adjustment. Just remove the shell. Look inside where the motors are for the panagraphs. I believe you can loosen one of the screws to slide the arm that engages the panagraph so it will lower it down more. You do not remove the panagraph.
Thank you!
Sorry, I just read your request...My suggestion is to re-boot the engine. Give your engine a new ID number as the directions in the manual will explain. My JLC GG1 did this and that solved the issue....Good Luck, Merry Christmas...
Access to this requires an OGR Forum Supporting Membership
